RIGS

BourneDrill 1250R

Manufacture Date: December 2004

Specifications:

Mast Gross Load Capacity of 20430kg
Draw Works Single Line Pull 4500kgs
Depth Rating 427m 2 7/8 Drill Pipe
Depth Rating 320m 3 ½ Drill Pipe
On Board Dual Stage Piston Compressor 750cfm/100psi or 525cfm/200psi
Interlocked Rotary Table Guard

Rig Carrier

Mercedes Benz Actros 8x4 3240 Fully Computer Monitored Diagnostic System.

Ancillary Support Equipment

2005 Atlas Copco XRVS466 1000cfm/360psi Silenced High Pressure Compressor

1996 Volvo FL10 8x4 Truck Fitted With a 6100lt Flat Bed Water Tank ROPS Fitted

Trailer Mounted 4c Core Barrel Slide

F250 Dual Cab 4x4 Crew Vehicle

Click here to view technical data sheet

Model Schramm T450WS

Manufacture Date: March 2007

Specifications:

Mast Gross Load Tower Capacity Sliding Angle Mast 22676kg
Head Pull Back 13605kg at 65.9mpm
Onboard Compressor Sullair 20/12h STR 1150cfm/350psi
Foremost 400 Rod Handler
Partial Rig Silencing
AirDrill Tool Joint Breaker
Hydraulic Pipe Spanner
15000lb Winch
Hydraulically Pivoting Drillers Control Panel
Interlocked Rotary Guarding
Fire Suppression
MIG Welder

The rig has the ability to do rod changes and rod trips completely hands free there is no offsider requirement to change drill rods other than to operate the rod handler from a safe distance.

Depth Capacity

2 7/8 Inch Drill Rod 550m
3 ½ Inch Drill Rod 450m

Ancillary Support Equipment

2006 Volvo FM9 8x4 Truck fitted with a 6100lt Flat Bed Water Tank and AirDrill Rod Stacker HIAB 088DUO truck Crane

1997 30-420 MAN 8x4 Truck Fitted With a 9000lt Flat Bed Water Tank and 3000lt Fuel Tank

Trailer Mounted 4c Core Barrel Slide

Toyota Hilux Dual Cab 4x4

Click here to view technical data sheet

Model Boart LongYear KWL 1600

Manufacture Date: February 2009

Mounted on a 2008 8x8 Mercedes Actros

Specifications:

Mast Gross Load Tower Capacity Sliding Angle Mast 22676kg
Head Pull Back 21642kg at 65.22mpm
Onboard Bourne Drill 8 ½ x5 Mud Pump
KWL Rod Handler
Rig Silencing
AirDrill Tool Joint Breaker
Hydraulic Pipe Spanner
180045kg Haul Winch Over Wind System
Hydraulically Pivoting Drillers Control Panel
Interlocked Rotary Guarding
Fire Suppression
Tilting Rod Bin
MIG Welder

Ancillary Support Equipment

2008 Atlas Copco Compressor XRXS566CD 1150cfm/435psi

2004 DAF 8x4 Truck Fitted With an 8900lt Flat Bed Water Tank and Rod Stacker with a UNIC Stiff Boom Crane 3000lt Fuel Tank

MAN 8x4 Truck Fitted With a 8000lt Flat Bed Water Tank and 5000lt Fuel Tank

Toyota Hilux Dual Cab 4x4

Click here to view technical data sheet

Drilling Depth Guidelines

Drilling capacities have been calculated from theoretical values of the pull back system with 30% deduction for efficiency losses to arrive at the above capacities.

Therefore these values are indicative only and depend on drilling conditions.

CORE DRILLING
DRILL ROD/CORE BARREL	Hole Depth (meters)	Hole Depth (feet)
NQ	2 000	6,562
NQ V-WALL	2 240	7,349
HQ	1 350	4,429
HQ V-WALL	1 647	5,404
PQ	900	2,953
PQ V-WALL	1 170	3,839

REVERSE CIRCULATION
DRILL ROD	Hole Depth (meters)	Hole Depth (feet)
4-1/2 inch (114.3 mm)	450	1,476
	Hole size: 6-1/2 inch (165.1 mm)

TORQUE AND RPM RATINGS (Based on engine speed of 1,800 RPM)
	Displacement in 3/rev	Oil Flow US•gpm	Torque Nm lbft		Output Speed RPM
Core Drilling	14	118	2100	1,548	925
2.0:1	10	118	1500	1106	1250
Reverse Circualtion Drilling	14	118	18100	13,408	105
16.52:1	10	118	11363	8,380	157
NOTE: Maximum spindle speed at 14 in3 hydraulic motor displacement 1200 rpm in high gear. Maximum spindle speed at 10 in3 hydraulic motor displacement 1300 rpm in high gear. Exceeding these speeds may result in damage to the unit.